Is your prefinished or engineered floor worn, scratched or dull? Good news: in many cases, it can be sanded and transformed. You often hear that these floors “can’t be sanded.” That’s not true, on one condition: there must be enough hardwood left, and the work must be done by someone who knows exactly how far to go. At Plancher Summum, we have been sanding prefinished and engineered floors for years, then oiling them for a matte, natural finish that is easy to repair.
Prefinished, engineered: what’s the difference?
A prefinished floor received its finish at the factory, before installation. It can be solid hardwood or engineered wood. An engineered floor is made of a hardwood top layer (the wear layer) glued onto a plywood or fibre base. Only that top layer can be sanded: it determines everything.
Can your floor be sanded? The 2.5 mm rule
The minimum generally recognized in the industry, notably by the National Wood Flooring Association (NWFA), is about 2.5 mm of hardwood remaining (roughly 3/32 in.) before sanding. This means the thickness actually left above the base, not the total thickness of the floor or the figure on the product sheet.
And 2.5 mm alone is not a guarantee. How flat the floor is, height differences between boards and the depth of the damage all determine how much wood must be removed. The thicker the layer, the more margin there is. That is why we assess every floor on site, and why we spot bumps and uneven areas before we start, not during.
Why sanding a prefinished floor takes more skill
Factory finishes contain aluminum oxide, an extremely hard mineral added to resist wear. It is also very hard to remove. It takes high-performance ceramic abrasives, and sanding is much slower. The V-grooves between the boards must also be sanded out.
On a thin wear layer, there is no room for error. A contractor in a hurry, using overly aggressive paper, can sand right through the hardwood and expose the base: the floor is then lost. We do the opposite: we sand in a more controlled way, we check before and during, and we take the time it needs. It takes longer, but that is what saves your floor.
The result: a transformed floor that is easier to live with
Once the factory finish is removed, we apply our professional LOBA or Berger-Seidle oils, made in Germany. The wood regains a matte, natural look, less slippery and less glaring. Best of all, unlike the factory finish, a scratch can be repaired locally without resanding everything. Compare oil and varnish.
A few recent examples: about 780 sq. ft. of prefinished flooring sanded and oiled on Île-des-Lys in Terrebonne, 460 sq. ft. sanded on the diagonal to level a floor in Repentigny, and 610 sq. ft. of prefinished flooring tied in with new oak, then oiled in a single colour in L’Assomption.
What if sanding isn’t possible?
It happens: a wear layer that is too thin, a floor that has been sanded too many times, or too many exposed nails. In that case, we tell you straight, before we start, and we go over the options with you, including replacement. We don’t recommend covering a wood floor with a floating floor: it can be done, but it is not what best preserves the value of your home.
Our approach: do it right, once
To save money, the work has to be done right the first time, with the value of your home in mind. A floor can only be sanded a few times in its life, and a prefinished floor even fewer: every tenth of a millimetre counts. Our sanding is guaranteed for life.
Have your prefinished or engineered floor assessed
Wondering if there is enough wood left on your floor? We serve Montreal, Laval, the North Shore and the South Shore. Call us at 514-984-1160 or request your estimate online.